AE Blinds & Shutters


	Home \| About Us \| Our Products \| Gallery \| Our Factory \| Contact

Shutter Panel

Tilt rods are located in the center of the panel and controls the movements of the louvers by connecting them together.

Louvers are the components that rotate to offer control over the light and view.

Stiles are the vertical side peices of the panel that are secured to the horizontal rails. The stiles hold the louvers into place and keeps them evenly spaced for proper operation.

These rails are the horizontal components that attach the verticle stiles and add structure to the panel. These rails usually have equal heights.

A divider rail is sometimes placed between the top and bottom rail to add structure and integrity to the panel. The divider rail also enables the louvers in the upper section section to move independently from the lower section.

1/2 Circle
Fan top

Fan top shutters provide the finishing touch to any decor with their ability to show shutters in their best light. The louvers are movable by connecting directly to the hub and the frame.

Eyebrow

Fan top shutters are also available as an eyebrow.

ID Eyebrow

ID eyebrows are shutters that cover an arched opening. The panels are manufactured with a curved top rail.

Square Window

Square window shutters are the most commonly used type of shutter.

Raked Top

Rake top shutters have a straight angled top along with an angled top rail to conform with the opening.

Door

Doors sometime come with a lever type of handle which protrudes into the glass section of the door. In this case we have a circle or rectangluar cut out to accommodate this section.